This dental cotton roll production is special for producing dental cotton roll automatically, it is used to automatically cut the length of cotton rolls with different weights and width less than 50cm according to the set parameters, roll them up, and apply glue on the surface. The rolling process adopts the principle of dynamic and static friction, and the gluing process is completed using the principle of speed difference friction. The rolling diameter is uniform, and cotton sticks with different rolling diameters can be completed by adjusting the spacing between the rolling plates and the breaking length parameters. The glue is applied using a swinging spray method and the principle of adhesive transfer. The glue is evenly applied and the surface of the cotton roll is smooth.
Cotton rolling and gluing machine: Machine size: 3000x1100 x 1600mm, LxWxH, Weight: app. 650KG Power supply: 380V 3P 50Hz Motor power: 2 kW Air pressure: 0.3-0.6Mpa Speed: app. 40rolls/min
Drying machine: All stainless steel material production Adjustable drying speed and temperature Fan circulating air supply Fully transparent Teflon mesh belt There are two modes of drying: electric hot air drying and steam hot air drying.
The use of electric heating equipment has low prices and high operating costs (electricity bills), while the use of steam heating equipment has high prices and low operating costs. Currently, 80% of them use steam heating for drying
1. The glued cotton rolls can be dried using a hot air dryer. 2. All stainless steel box, with a Teflon mesh belt with an effective width of 60 cm. Drying operation speed: 5m/min. 3. Steam aluminum alloy radiator, more complete heat energy conversion. The fan circulates hot air, saving energy and reducing consumption.
Machine size:
Three layers drying machine: 8000x3000x2800mm, transmission motor: 1.5 kw, fans 2.2kw x 3sets.
Single layer drying machine: 15000x3000x1800mm, transmission motor: 1.5kw, fan 1.5kw x 6 sets.
Audited Supplier 
){kind=link}